| EDC is experienced with the following materials: |
|
|
|
| -Polydicyclopentadiene (PDCPD) | -PC | -ASA/AES | |
| -Polyurethane Structural Foam RIM | -PC Blend | -Acrylic | |
| -Polyurethane Composite RIM | -PC/ABS | -SMA | |
| -Polyurethane Solid RIM | -PC/PBT | -PPO | |
| -Polyurethane Elastomeric RIM | -PBT | -PPE/PA | |
| -Polyurethane Foam | -Polyamide 6 & 66 | -PPS | |
| -Polyester Thermoset | -Polyamide/ABS | -Polyester Elastomer | |
| -Carbon Fiber Thermoset Composite | -ABS | -Glass Filled Nylon 66 | |
| -Nylon 6/ABS | -UHMW Polyethylene | ||
| -ASA |
Plastics
Contact:
Tony
Guglielmino-Director of Engineering
tonyg@edc-ltd.com
|
|
| -Injection Molding | -SMC (Sheet Molding Compound) |
| -Two-Shot Injection Molding | -RIM (Reaction Injection Molding) |
| -Liquid Injection Molding | -Dip Molding |
| -Blow Molding | -Urethane Foam |
| -Rotational Molding | -Foamed Vinyl Molding |
| -Thermoforming | -Liquid Composite |
| -Extrusion Molding | -Low Pressure Compression |
| -EPS Molding | -Cold Molding |
| -Structural Foam | -RTM (Resin Transfer Molding) |
| -Gas Assist Injection Molding | -Open Mold |
| -Compression Molding | -Hand Lay-Up Molding |
| Experience and Expertise |
| EDC's
engineering staff has experience with numerous types of plastic molding
processes and materials.
EDC
is very knowledgeable
|